You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
Help Support Collector Freaks Forum:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
-
-
Making the bonnet hinges.
Adding detail to the underside of the hood.
Hinges glued into place. The tape is to maintain a...
-
Roll cage made and fitted.
Did a bit more work to the rear wheels.
Started making the frame for the jump seat.
I've used square...
-
Finished making the seat.
Making the fuel tank. I started by making the basic shape, then adding strips to create the ridges...
-
Making the iconic hood scoop. I started with the base and the lower part of the scoop.
The top part is shaped them glued into place...
-
Added the rear interior panels and cross bracing. Next step is the roll cage.
Exterior door handles made. These will be functional.
-
Making the inner door panels. The door cards are missing, but this actually means even more work, as i have to replicate all the little...
-
Making the inserts for the rear wheels. There are 18 spokes, so have to be carefully marked out.
The holes are drilled then cut out...
-
Loading…
-
Loading…